Fimaks | Feed Automation Center

Feed Automation Center

The Fimaks Feed Automation Center is a management system developed to make feed preparation and distribution processes on farms planned,
measured and traceable.

By controlling all weighing, mixing, transfer and distribution processes from a single center, the system ensures that daily operations are carried out in a standardized way.

This solution offers farms the following benefits:

  • Up to 80% reduction in cost losses caused by incorrect loading.
  • Lower labor costs and less dependence on labor, as the need for skilled labor is eliminated
Fimaks | Feed Automation Center Fimaks | Feed Automation Center Fimaks | Feed Automation Center Fimaks | Feed Automation Center
DOWNLOAD FILE
Benefits

Benefits


  • Up to 80% reduction in cost losses caused by incorrect loading.
  • Lower labor costs and less dependence on labor, as the need for skilled labor is eliminated.
  • Better feed utilization thanks to TMR prepared every day with the same dosage and mixing ratio; a 5–10% increase in yield in the first year and better animal health.
  • Return on investment (ROI) reduced to 3–5 years.
  • Time savings with 24/7 operation; feeding 2–4 times a day (6 times with the feeding robot). Fast distribution with TMR prepared automatically before the working day begins.
  • Concentrate feeds can be loaded into the bunkers once every 1–5 days, dry roughage once every 1–5 days, and silage and wet feeds daily or every other day.

Main Control Panel


  • The central control panel operates and controls all the equipment required to load the mixer feeder.
  • Thanks to adjustable special parameters, roughage in particular can be loaded precisely and evenly.
  • While roughage is being shredded, motor power is adjusted automatically according to the load. This achieves optimum efficiency with low motor power. The inverter technology used keeps energy consumption to a minimum.
  • The PLC-based system is managed via a touch screen with a modern user interface. All parameters, operating states and fault notifications can be easily monitored on this screen.
  • The control panel allows 17 different pieces of equipment to be controlled in sync.
  • In this way, all rations are loaded into the mixer feeder automatically.
  • In addition, the remote connection feature provides online access to the system, allowing settings and parameters to be updated.
  • The control panel is designed with an infrastructure ready for options to be added in the future, such as an “automatic feed distribution system”.
Main Control Panel

Technical Specifications

Connectable roughage loading tables 6
Number of connectable conveyors 3
Number of silo auger connections 4
Number of connectable mineral bunkers 4
Number of connectable external devices 3
Width x Length x Height 120 x 52 x 140 cm
Weight 300 Kg
Voltage 400 V
Frequency 50/60 Hz
Roughage Loading Table and Conveyor Belts

Roughage Loading Table and Conveyor Belts


  • Feed placed on the table is carried to the shredders by the chain conveyor system in the floor. The shredded feed is transferred to the belt and automatically sent to the mixer feeder in the correct amount.
  • The tables offer trouble-free use with both solid feed materials (straw, hay, alfalfa bales, etc.) and loose feed types (silage, etc.)
  • For feed preparation, it is enough to load the table with the amount of feed needed for the day; all remaining operations are carried out by the automatic feeding system.
  • With different volume options from 18 to 42 m³, the needs of farms of every size can be met.

Technical Specifications

TECHNICAL SPECIFICATIONS 4 m / 18 m³ 6 m / 26 m³ 8 m / 34 m³ 10 m / 42 m³
Total length (mm) 4706 6706 8706 10706
First leg distance (mm) 430 430 430 430
Distance between first and second leg (mm) 3310 2780 3780 3110
Distance between legs (mm) – 2535 3535 3100
Distance from front leg to outer edge (mm) 970 970 970 970
Conveyor bracket height (mm) 725 725 725 725
Clearance below feed outlet (mm) 1170 1170 1170 1170
Total height (mm) 3400 3400 3400 3400
Rear loading height (mm) 1160 – 1460 1160 – 1460 1160 – 1460 1160 – 1460
Table length (mm) 4706 6706 8706 10850
Tapered loading width (mm) 3000 3000 3000 3000
Inside width (mm) 2000 2000 2000 2000
Width without drive (mm) 2140 2140 2140 2140
Front width including gearbox (mm) 2500 2500 2500 2500

Mixer Feeder Loading and Discharge Belts


  • The load cell system integrated into the loading belt guarantees accurate weighing of roughage and ensures the correct amount is transferred to the mixer feeder.
  • The discharge belt transfers the prepared ration to the feeding robot, mixer or wagon in a controlled and continuous manner.
  • Thanks to its adjustable legs, it adapts to all terrain and ground conditions.
Mixer Feeder Loading and Discharge Belts

Technical Specifications

Belt Lengths (m) 5 – 6 – 11
Width (inside) (mm) 606
Width (excluding external junction box) (mm) 804
Width (including external junction box) (mm) 860
Speed Range 48 – 60 m / min
Power 2.2 kW 3-phase 400 V 50 Hz
Current 4.55 A

Control and data monitoring via remote access

Concentrate Feed Bunkers

Concentrate Feed Bunkers


  • The 5 m³ concentrate feed bunkers automatically deliver the feed needed daily, such as flakes, grain corn, barley, soybean hulls and pellets, to the mixer feeder.
  • Depending on requirements, the system supports the management of up to 8 pieces of equipment in total. Feed taken from the bunkers is conveyed steadily and continuously by the auger system inside the tube.

Technical Specifications

Volume (m³) 5
Width (mm) 2600
Length (mm) 2100
Front Height (mm) 3600
Rear Height (mm) 3100
Hopper Width (mm) 2500
Hopper Length (mm) 2000

Mineral Feeding System


  • The mineral feeding system delivers the minerals to be added to the ration precisely to the mixer feeder, thanks to agitators that prevent clumping.
  • Its 1.5 m³ volume, powerful conveyor auger and agitator motors ensure highly accurate and balanced feeding. Precise dosing of mineral components maintains ration balance and increases feeding efficiency.
Mineral Feeding System

Technical Specifications

Volume (m³) 1.5
Total Length (mm) 1430
Hopper Length (mm) 1170
Height (mm) 1060
Width (mm) 800
Conveyor Auger Motor 0.75 kW / 2840 rpm
Agitator Motor 0.9 kW / 670 rpm
Mixer Feeders

Mixer Feeders


Working in integration with the automatic feeding system, Fimaks mixer feeders are offered in a wide capacity range suitable for farms
of different sizes.

Vertical auger models range from 8–24 m³ in volume, and horizontal auger models from 12–17 m³. Vertical mixer feeders come with tungsten-coated knives and high-capacity planetary gearboxes as standard.

A Hardox body is standard on all models. Its high wear resistance maintains mixing performance over a long period and increases the overall durability of the machine.

All machines are equipped with the Italian Dinamica Generale DG8000IC weighing system and an inverter-controlled panel. During discharge, when the set weight is reached, the auger speed increases automatically, preventing feed from remaining inside the machine.

Technical Specifications

Vertical Mixer Feeder Single Auger – 8 m³ | 10 m³ | 12 m³
Twin Auger – 16 m³ | 20 m³ | 24 m³ | 30 m³
Horizontal Mixer Feeder Single Auger – 12 m³ | 17 m³

Feed Distribution Wagons


Delivering the prepared feed to the animals in the right amount and evenly is of great importance for efficient feeding.

As a complementary part of the system, Fimaks feed distribution wagons carry out this process quickly, precisely and in a controlled way.

The monitors used in the automatic feeding system are also integrated into the feed distribution wagons, so the consumption and efficiency of each group can be easily tracked.

Tractor-towed models with 20 m³ and 30 m³ capacity and a truck-mounted model with 38 m³ capacity are available.

The chain conveyor system fitted as standard on truck-mounted feed distribution wagons increases its speed as the feed decreases, ensuring a continuous and even flow.

With its smart tracking system and efficient distribution mechanism, it prevents feed waste and optimizes the feeding process.

Feed Distribution Wagons
Feeding Robot

Feeding Robot


The Fimaks Feeding Robot forms the final stage of the fully automatic feeding process by delivering the prepared ration to the animals automatically. Working integrated with the system, the robot distributes the ration it receives from the mixer feeder precisely and in a controlled manner along defined routes. Its 2.5 m³ volume allows frequent and continuous feeding, ensuring the animals are fed evenly throughout the day. Designed for uninterrupted 24/7 operation, the robot enables continuous feeding; in addition, more than one robot can be integrated into the system as required, allowing simultaneous distribution on different lines. This reduces labor requirements and optimizes feeding processes, especially on large-scale farms.

The robot runs 100% on electricity. It monitors its own charge level and, when needed, automatically goes to the charging station to recharge. These features reduce energy costs while delivering uninterrupted and sustainable operating performance, saving the farm time and operating costs.

The control system works in sync with the central control panel and automatically applies the ration quantities defined for each group. The sensor-assisted drive system ensures high operational safety with obstacle detection, positioning accuracy and safe movement features. Thanks to the smart software infrastructure, daily distribution reports can be generated and feed consumption data analyzed to increase farm efficiency. In this way, the feeding robot does more than just carry feed: it makes feeding management more measurable, controlled and efficient.